Environmental Sensors

• Liquid detection sensor for IPDU-Sx, x = water sensor cable, y = 2-wire cable

  

  For warning of flooding. 100% waterproof electronics. Detects any conductive liquid. Puddle: 0.6" (15 mm) diameter. Detects liquid depth >0.1" (2.5 mm).

• Smoke Detection Sensor, CE Approved

  

  Photoelectric smoke detector

• Temperature sensor for ENVIROMUX-SEMS-16 or IPDU-Sx

  

  Temperature Sensor. Applications from 32°F to 122°F (0°C to 50°C). Re-calibration is not necessary after initial set-up.

• Humidity sensor for ENVIROMUX-SEMS-16 or IPDU-Sx

  

  Humidity Sensor. Applications from 20 to 80% relative humidity at temperatures between 32°F and 104°F (0°C to 40°C. Re-calibration is not necessary after initial set-up.

• Temperature/humidity sensor for ENVIROMUX-SEMS-16 or IPDU-Sx

  

  Temperature/Humidity Sensor. Applications from 32°F to 122°F (0°C to 50°C) and 20 to 80% relative humidity. Re-calibration is not necessary after initial set-up.

• Temperature/wide range humidity sensor for ENVIROMUX-SEMS-16 or IPDU-Sx

  

  Temperature/Wide Range Humidity Sensor. Detect humidity from 32°F to 122°F . Wide Range humidity readings accurate to ±3% for 20 to 80% relative humidity .

• Precision humidity sensor for ENVIROMUX-SEMS-16

  

  NIST certified accurate to within ±1% from 10 to 80% relative humidity at 77°F to 95°F (25°C to 35°C). Two-point field calibration. Output: 4-20 mA DC = 0 to 100% RH.

• Precision temperature/humidity sensor for ENVIROMUX-SEMS-16, 20°F to 120°F

  

  Applications from 20°F to 120°F (-6°C to 48°C). Temperature accurate to within ± 1.50%. NIST traceable calibration accurate to within ±1% from 10 to 80% relative humidity at 77°F to 95°F (25°C to 35°C). Uses a platinum RTD for precision temperature compensation.

• Precision temperature/humidity sensor for ENVIROMUX-SEMS-16, -20 to 140°F

  

  Applications from -20 to 140°F (-28 to 60°C). Temperature accurate to within ± 1.50%. NIST traceable calibration accurate to within ±1% from 10 to 80% relative humidity at 77 to 95°F (25 to 35°C). Uses a platinum RTD for precision temperature compensation.

• Precision temperature/humidity sensor for ENVIROMUX-SEMS-16, 30 to 180°F

  

  Applications from 30°F to 180°F (-1°C to 82°C). Temperature accurate to within ± 1.50%. NIST traceable calibration accurate to within ±1% from 10 to 80% relative humidity at 77°F to 95°F (25°C to 35°C). Uses a platinum RTD for precision temperature compensation.

• Wall mount temperature/humidity sensor for ENVIROMUX-SEMS-16

  

  Wall Mount Temperature/Humidity Sensor. Applications from 23 F to 131 F (-5 C to 55 C) and 10 to 90% relative humidity. Re-calibration is not necessary after initial set-up.

• Duct mount temperature/humidity sensor for ENVIROMUX-SEMS-16

  

  Duct Mount Temperature/Humidity Sensor. Applications from 14 F to 140 F (-10 C to 60 C) and 10 to 90% relative humidity. Re-calibration is not necessary after initial set-up.

• Pipe Temperature Sensor

  

  Pipe Temperature Sensor with lengths from 1 ft. to up to 1000 ft. of CAT5E Cable

• Outdoor Temperature sensor for ENVIROMUX-SEMS-16

  

  Outdoor Temperature Sensor. Applications from -40°F to 185°F (-40°C to 85°C). Weatherproof enclosure designed to IP67 specifications.

• Smoke detection sensor for ENVIROMUX-SEMS-16

  

  Smoke Detection Sensor. Photoelectric smoke detector. Built-in 135° F (57° C) thermal heat sensor.

• Liquid detection sensor for ENVIROMUX-SEMS-16, x = water sensor cable, y = 2-wire cable

  

  For warning of flooding. Detects liquid depth >0.1" (2.5 mm) . Minimum puddle: 0.6" (15 mm) diameter. 100% waterproof electronics. Detects any liquid, except deionized water. RJ45 connector. Supports CAT5/5e/6 cable up to 1,000 ft. (305 m) .

• Air Velocity Sensor for ENVIROMUX Monitoring Systems

  

  Reliable mechanical solution for monitoring air flow. Dust resistant design. Requires the ENVIROMUX-S5VDC sensor converter to operate.

• Carbon monoxide detector for ENVIROMUX-SEMS-16

  

  Continuous air monitoring. Pre-set alarm points alert at:70 ppm after 60 to 240 minutes. 150 ppm after 10 to 50 minutes. 400 ppm after 4 to 15 minutes.

• 4-20 mA sensor converter for ENVIROMUX-SEMS-16

  

  4-20 mA Sensor Converter. External RJ45 device monitors up to two 4-20 mA analog sensors. Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors.

• 5VDC sensor converter for ENVIROMUX-SEMS-16

  

  5 V DC Sensor Converter. External RJ45 device monitors up to two linear DC sensors, 0 ~ 5 V DC. 8-position Screw Terminal. Compatible with ENVIROMUX-SEMS-16 only.

• Sensor Extension Cables

  

  Connect dry contact sensors to the ENVIROMUX-SEMS-16