Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
E-IPCAM-DHNPO-V2P
E-IPCAM-DHNPO-V2P

High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE)

NTI Part #: E-IPCAM-DHNPO-V2P
Environment Monitoring System IP Surveillance Cameras IP Cameras compatible with ENVIROMUX® E-2D, E-5D, E-16D, and E-MICRO

Overview

  • View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
    • Control the camera using the camera web interface accessible from the ENVIROMUX web interface.
  • With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails or stored locally on a connected flash drive.
    • A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
  • 1/2.8" Progressive Scan CMOS
  • Video Compression: H.265/H.264/MJPEG
    • Supports three simultaneous video streams
  • 2MP resolution @ 30 fps
    • Supports 1920x1080, 1280x960, 1280x720
  • Night Vision IR Range: 98 feet ( 30 m)
  • Lens: 4 mm (0.16 in)
  • Viewing angle: 86.4°
  • Pan: 0 to 355°
  • Tilt: 0 to 75°
  • Rotate: 0 to 355°
  • Power:
    • Input: 100 to 240 VAC at 50 or 60 Hz
    • Output: 12 VDC, 1A external power adapter (included)
    • Max consumption: 5 W
    • Power over Ethernet standards supported: IEEE 802.3af
  • 10/100 Mbps Ethernet port for wired connections.
  • Micro SD memory card slot (up to 128 GB)
  • System compatibility: ONVIF, ISAPI, SDK, Ehome
  • Operating temperature: -22 to 140°F (-30 to 60°C).
  • Dimensions WxH: 4.37x3.24" (111x82 mm)
  • Waterproof rating: IP67 (camera housing only)
  • Compatible with E-2D/5D/16D and E-MICRO.
  • Regulatory approvals: CE, FCC, RoHS