Environment Monitoring System Tamper Switch & Emergency/Panic Button
Tamper Switch & Emergency/Panic Button
- Tamper switch for drawers and alarm boxes.
- Sends activation signal when tamper switch is released.
- Silver-plated contacts ensure reliable long-term operation.
- High-impact white plastic case, screw terminals.
- Screw terminal
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m).
- Normally-open contacts at rest, closed contacts when depressed.
- Operating temperature: -13 to 158°F (-25 to 70°C ).
- Dimensions (WxDxH): 2.74x1.12x0.63 in (70x28x16 mm),
- Sends activation signal when button is pressed.
- For normally closed or normally open circuit connections.
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m)
- Dimensions WxDxH: 0.9x0.6x3 in (23x14x76 mm)
- Regulatory approvals: RoHS